Features & Specifications

• One-piece, 5052 aluminum floor with 2" radius corners.
• 17" side height constructed of 10-gauge material.
• Supplied with 22" front board pockets.
• Standard 22" rear board pockets providing slot for installing boards across tailgate.
• 6" side braces slanted forward 10 degrees.
• Fully boxed dirt shedding top rail with 45-degree slope.
• One-piece front has integrated 3⁄4 cab shield.
• 3/16" 5052 aluminum sides and ends
• 8" formed longitudinals (1/4" 5052 aluminum) interlaced with 3" I-Beam crossmembers (6061 aluminum).
• 5" formed channel longitudinal of 3⁄16" material.
• Recessed shock resistant rubber mounted, FMVSS 108 clearance lights, also three cluster lights provided in lower apron; includes rear facing stop-turn-tail lights mounted at top of corner post for added visibility.
• All appearance corners have large radius bends.
• Full height 5" deep rear corner posts.
• 9' body weight: 1,383 lbs.
• 11' body weight: 1,500 lbs.

Tailgate Features & Specifications

• 23" vertical gate with two vertical braces and fully boxed frame.
• Concealed lower latch hardware with open access to upper EZ-LATCH mechanism.
• Equipped with spreader chains and banjo eye chain holders in corner posts.
• Two-way tailgate with adjustable rod on trip lever.
• Tailgate recessed flush with rear face of corner posts.
• Optional spreader sill available.

Value and Benefits

• All aluminum body, weighing 800 pounds less than a steel body, providing fuel savings and increased payload capabilities.
• Aluminum body shows commitment to company image and projects confidence in employees and customers.
• Easy, one-person operation of aluminum tailgate; 132 pounds lighter than a steel tailgate.

All Aluminum Body

The 5052AL aluminum Z-Spec provides the same strength and features of the steel Z-Spec, with a lower weight.  This provides fuel savings and the capability to haul heavier loads, all with a sleek, stylish appearance, improving your company image.

Integral Dump Body Construction

One piece cab protector and bulkhead, as well as the factory punched window, eliminates rust potential that comes with welded or bolt-on pieces.  One piece floor with radius sides and 3" interlaced I-beam cross members on 16" centers provide a strong and stable body.  Dirt shedding sides improve safety, removing the possibility of accumulated debris flying off.

Gussets

Front gussets are integrated into the bulkhead, eliminating rust potential.  Front and rear gussets are supplied with 22" board pockets, and the rear gussets are flush with the tailgate, allowing for a fully enclosed body for larger loads of materials.

Aluminum Hard Hat

• ¼" floor in lieu of 3/16" floor

• 12” centers in lieu of 16” centers.

• 9’ Body weight: 1,447 lbs.

• 11’ body weight: 1,576 lbs.